2022年5月31日星期二 GMT+00:00 16:00:00
作为LED显示屏的心脏,灯珠种类繁多,每一种都有自己独特的特点。 就是数以万计的它们与控制板等其他硬件一起成为LED显示屏。 今天就跟着小编一起来了解一下LED灯珠对LED显示屏的影响吧!
1. 视角
LED显示屏的视角取决于LED灯珠的视角。 目前大部分户外显示屏采用100°水平视角; 垂直视角50°; 椭圆形LED,室内显示屏水平垂直120°; 贴片LED。 由于其特殊性,高速公路上的显示屏一般为30°; 视角的圆形LED就足够了。 一些高层建筑的显示屏对垂直视角的要求很高。 视角和亮度相互矛盾。 大视角必然会降低亮度。 视角的选择需要根据具体的目的来确定。
2.亮度
LED亮度是显示亮度的重要决定因素。 LED的亮度越高,使用电流的余量就越大,有利于节省功耗,保持LED的稳定性。 LED 具有不同的角度值。 芯片亮度设置时,角度越小,LED越亮,但显示屏的视角越小。 一般应选择100度的led,以保证显示屏有足够的视角。 对于不同点间距、不同观看距离的显示屏,要在亮度、角度和价格上找到一个平衡点。
3.效率低下
由于全彩显示屏是由红、绿、蓝三色LED组成的数万甚至数十万像素组成的,任何一种颜色的LED出现故障都会影响显示屏的整体视觉效果。 一般来说,根据行业经验,LED显示屏出货前72小时故障率不得高于万分之三。 (指LED灯泡本身引起的故障)
4、抗静电能力
LED是一种半导体器件,对静电很敏感,容易导致静电失效。 因此,抗静电能力对显示屏的使用寿命非常重要。 一般来说,LED的人体静电模式测试失效电压不得低于2000V。
5. 寿命
LED器件的理论寿命为100000小时,比LED显示屏其他元件的工作寿命要长得多。因此,只要LED器件的质量有保证,工作电流合适,PCB散热设计合理,显示屏的生产工艺严谨,LED器件将是整体最耐用的元器件之一显示屏。
LED器件占LED显示屏价格的70%,所以LED器件可以决定LED显示屏的好坏。中国不仅是LED器件生产大国,也是LED显示屏制造的聚集地。 LED显示屏的高科技要求是未来的发展趋势。 LED显示屏的高品质要求,不仅关乎LED显示屏厂商的走向,也涉及LED显示器件厂商的发展。从LED器件来看,中国将推动从LED显示屏制造大国向LED显示屏制造强国的转变。
6.衰减特性
LED显示屏长时间运行后,亮度会下降,显示屏颜色会不一致,这主要是LED器件亮度衰减造成的。 LED亮度的衰减会降低整个显示屏的亮度。红绿蓝LED亮度衰减幅度不一致会导致LED显示屏颜色不一致,也就是我们常说的显示屏花屏的现象。高质量的 LED 器件可以很好地控制亮度衰减。按常温20mA照明1000小时的标准,红色衰减应小于2%,蓝色和绿色衰减应小于10%。因此,20mA电流不宜用于显示屏蓝绿LED的设计,最好只使用额定电流的70%~80%。
除了红绿蓝LED的特性外,衰减特性还受使用电流、PCB散热设计、显示屏环境温度的影响。
7. 尺寸
LED器件的尺寸影响LED显示屏的像素距离,即分辨率。 5mm椭圆灯主要用于p16以上的户外显示,3mm椭圆灯主要用于p12.5、p12和P10的户外显示,3528贴片LED主要用于P6和P8的室内显示,2020贴片LED主要用于 用于P2、P3等室内显示。 在点间距不变的前提下,LED器件尺寸增大,可以增加显示面积,减少颗粒感。 但是,由于黑色区域的减少,对比度会降低; 反之,LED尺寸减小,显示面积减小,颗粒度增加,黑色面积增加,对比度增加。
8. Consistency
The full-color display screen is composed of numerous red, green and blue LED pixels. The brightness and wavelength consistency of each color LED determines the brightness consistency, white balance consistency and chromaticity consistency of the whole display screen. Generally speaking, the display screen manufacturer requires the device supplier to provide LEDs with a wavelength range of 5nm and a brightness range of 1:1.3. These indicators can be achieved by the device supplier through the light and color separation machine. Voltage consistency is generally not required. As the LED has an angle, the full-color LED display also has angle directionality, that is, when viewed from different angles, its brightness will increase or decrease. In this way, the angle consistency of red, green and blue LEDs will seriously affect the consistency of white balance at different angles, and directly affect the fidelity of video color on the display screen. In order to achieve the matching consistency of the brightness changes of red, green and blue LEDs at different angles, it is necessary to strictly carry out scientific design in the packaging lens design and raw material selection, which depends on the technical level of the packaging supplier. For a display screen with good white balance in the normal direction, if the angle consistency of the LED is not good, the white balance effect of the whole screen at different angles will be poor. The angle consistency characteristics of LED lamp beads can be measured by LED angle comprehensive tester, which is particularly important for medium and high-grade display screens.
Thank you for watching. If there is a problem with the LED display, please contact us and we will solve it for you as soon as possible!